Issues to be noted during the operation of CNC machining centers

For general enterprise CNC machining center manufacturers, it may be necessary to understand the precautions before operation. The main purpose of this insurance is not to affect production efficiency and final product quality. Here, today's CNC machining center manufacturer will briefly introduce to you what precautions should be taken by operators and technicians after finishing their work?

1、 Once the operation is completed, the tools on the spindle must be returned to the original tool library in the specified manner. At the same time, the spindle taper hole and fine dust on each tool handle should be wiped clean to ensure that there are remaining tools, thereby preventing the use of tools from affecting the tool life and the quality of the fit between the tool and the spindle.

2、 Before closing, ensure that the toolbox is in place, the slider and work should be centered, and the spindle box is in the most suitable position for tool replacement. It should also be noted that if the position of the main axle box is lower than that of the tool changer, it must be stopped immediately. It's not afraid of 10000, just in case. This is also to prevent various problems caused by improper operation during restart.

3、 At the end of the operation, technicians should promptly clean up the remaining debris and wipe the machine with a clean towel, as it is usually necessary to regularly use work gaps to remove debris when a large amount of metal begins to work. If you clean with an air gun. When cleaning, the spindle must have a knife to avoid errors.