The climbing problem of machining centers generally occurs when starting the acceleration section or alternate speed feed, and is often caused by poor lubrication of the feed transmission gear, as well as excessive load and other factors And it should be noted that the coupling used to connect the servo motor motor and the ball screw, such as loose connection or coupling defects such as cracks, can cause the rotation of the ball screw and the servo motor to be different steps, resulting in slow and fast feed motion of the CNC machine tool machining center, causing crawling conditions.

CNC machining centers are expensive and require everyone to pay attention to the accuracy of equipment, application, and maintenance. The CNC machine tools of machining centers also have their own diagnostic functions. The actual operators need to undergo training before they can operate them independently. They should have a strong sense of responsibility, be good at using their brains, and study and train diligently; In order to prevent large vibrations in machinery and equipment, CNC machining center manufacturers should prevent exposure to sunlight and heat transfer, and have standards for temperature control in a natural environment, which can significantly reduce the probability of machining center problems; There are no specific requirements for switch mode power supplies, and it is generally agreed that a swinging positive and negative pole of 10% is appropriate. However, in areas where the power supply system is weak, it is better to use dedicated lines to transport the power supply system to the CNC machining center or modify the voltage regulator setting; In summary, it is all for the better and stronger application of machining centers to complete production. Regular maintenance can not only reduce problems but also broaden the application time.

If there is abnormal noise in the servo motor shaft during fitness exercise, it may be caused by mechanical equipment noise caused by ball screws, couplings, and different servo motor motors. The column type machining center motor and coupling can be loosened and the motor can be operated separately. If the motor still has noise, adjust the speed ring gain value and position ring gain value appropriately to make the motor silent. If there is no noise, identify the problem of parallelism between the ball screws and coupling, re calibrate the parallelism, and connect it to the motor. The difficulty can generally be solved. 

In some high-tech products or medical devices, the precision requirements for these components are higher, so the charging standards for CNC machining center manufacturers will also be more expensive. CNC machining center manufacturers are continuously reforming and innovating in their production and processing technologies, resulting in the emergence of many new technologies, such as new raw materials, new technologies, and new processes. On the one hand, this has raised the production and manufacturing standards of non-standard precision CNC machined parts, and on the other hand, it has greatly improved productivity. During the entire process of non-standard precision CNC machining, some work clothes and fixtures are used at night to assist, which improves productivity and enhances the accuracy of processed products and workpieces, and also reduces the damage rate of actual operators.